Rca L42FHD2X48 Manuel d'utilisateur télécharger pdf (Page 29)

4. Choose which component button you would like to set:

Set DVD Channel - Allows you to set the channel the TV tunes to when you press the DVD button.

Set SAT-AUX Channel - Allows you to set the channel the TV tunes to when you press the SAT/AUX

button.

5. Press the left or right arrow to select the choice that matches the way you have the component

connected to this TV.

You can select from the following inputs or channels:

N/A – Choose this option if you don’t have a component connected to the TV, or if you don’t want the TV

to automatically tune to the correct channel/input when you’re using this component.

Channel 3 or 4 - Choose this option if the component is connected to the ANTENNA/CABLE jack on the

back of the TV, and you want the TV to tune to channel 3 when you press the corresponding button on

the remote. Reminder: Make sure the component’s Channel 3/4 switch is set to channel 3.

VID 1 or VID 2 (Video Input) – Choose this option if the component is connected to the VIDEO INPUT 1

jack on the back of the TV or the VIDEO INPUT 2 jack on the side of the TV and you want the TV to tune

to the VIDEO INPUT channel when you press the corresponding component button.

CMPT (Component Video Input) – Choose this option when a compatible component video source,

such as an HDTV tuner, satellite receiver, or DVD player, is connected to the three component VIDEO

INPUT jacks (Y Pb Pr) on the back of the TV and you want the TV to tune to the component VIDEO

INPUT channel (CMPT) when you press the corresponding component button.

PC – Choose this option when the component is connected to the PC INPUT jack on the back of the TV

and you want the TV to tune to the PC input when you press the corresponding component button.

HDMI 1, HDMI 2, HDMI 3 or HDMI 4 – Choose this option when the component is connected to the

HDMI 1/DVI or the HDMI 2/HDMI 3 INPUT on the back of the TV or HDMI 4 on the side of the TV, and

you want the TV to tune to the HDMI INPUT channel when you press the corresponding component

button.

Parental Controls and V-Chip

The choices in the US V-Chip and Canada V-Chip menus involve software inside your TV, referred to as

V-Chip, which allows you to block TV programs and movies. TV programs can be blocked by age-based

ratings, such as TV-MA (See page 30). If available, TV programs can also be blocked by content, such as

adult language (L) (See page 31). Movies can only be blocked by age-based ratings (See page 31). Once

you block programs, you can unblock them by entering a password. By default, the software inside your TV

is turned off or unlocked. For instructions to lock V-Chip, see page 30.

V-Chip - US and Canada

V-Chip reads the program’s age-based rating (TV-MA, TV-14, etc.) and content themes (Violence (V), Adult

Language (L), etc.). If you have blocked the rating and/or content themes that the program contains, you

receive a message that the channel is currently blocked. Change the channel or press OK to enter your

password and temporarily deactivate the parental controls.

Broadcasters are not required to provide content themes, so programs received with no content themes are

blocked only if you block their age-based rating. You can also block programs that have been given an

Exempt rating, and programs that are considered unrated. See page 45 for the US and Canada ratings

explanations.

Note: Parental control

settings are not

available for HDMI 1,

HDMI 2, HDMI 3,

HDMI 4, CMPT or PC

INPUTS. These

settings must be set in

the connected

component’s parental

controls.

Using TV Features Chapter 3

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Rca L42FHD2X48 Manuel d'utilisateur Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Télévisions Rca L42FHD2X48