RCA 25415 Manuel d'utilisateur télécharger pdf (Page 9)

Priority Line

The priority line (one of the four lines) has precedence over the other three lines. When you pick up the handset or press the SPEAKER

button, the unit automatically selects the priority line ﬁrst. If the priority line is in use by another party, the unit will select the next

available line.

1. Press the MENU button while in standby mode.

2. Use the < REVIEW > button to scroll to

SET PHONE OPTIONS.

3. Press the SELECT/SAVE button.

4. Use the < REVIEW > button to scroll to

SET PRIORITY LINE.

5. Press the SELECT/SAVE button.

6. Use the < REVIEW > button to scroll to

1, 2, 3, or 4. The default is LINE 1.

7. Press the SELECT/SAVE button to save.

Delay Ring

Use this setting to delay the Central Ofﬁce ring.

1. Press the MENU button while in standby mode.

2. Use the < REVIEW > button to scroll to

SET PHONE OPTIONS.

3. Press the SELECT/SAVE button.

4. Use the < REVIEW > button to scroll to SET DELAY RING

5. Press the SELECT/SAVE button.

6. Use the < REVIEW > button to scroll to 0 ring up to 10 rings.

7. Press the SELECT/SAVE button to save.

NOTE: The default Delay Ring is 0. If your system has a phone with the auto attendant ON, we suggest that you set the Delay Ring to 2 rings. This allows the auto

attendant to pick up the incoming call before it rings in.

Phone ID

1. Press the MENU button while in standby mode.

2. Use the < REVIEW > button to scroll to

SET PHONE OPTIONS.

3. Press the SELECT/SAVE button.

4. Use the < REVIEW > button to scroll to

SET PHONE ID.

5. Press the SELECT/SAVE button.

6. Press the SELECT/SAVE button again to automatically set the phone ID, or press any memory button (1-16) to assign a phone ID.

NOTE: The INTERCOM indicator will ﬂash red and green if the ID is not programmed.

NOTE: The Phone ID (01-16) is unique. If you manually select a phone ID that belongs to another unit on the system, NOT AVAILABLE shows in the display. Press

SELECT/SAVE or choose another memory button.

NOTE: If the phone cannot ﬁnd an ID, determine if there are too many phones connected to the system. A maximum of 16 phones can be connected in the

system at one time.

NOTE: You may press the EXIT button at any time to exit , except during the ID search.

Phone Name

1. Press the MENU button while in standby mode.

2. Use the < REVIEW > button to scroll to

SET PHONE OPTIONS.

3. Press the SELECT/SAVE button.

4. Use the < REVIEW > button to scroll to

SET PHONE NAME.

5. Press the SELECT/SAVE button.

6. Use the touch-tone pad to enter the phonebook name (up to 8 characters). More than one letter is stored in each of the number keys.

For example, to enter “Lorraine,” press the 5 key three times for the letter L. Press the 6 key three times for the letter O. Press the 7 key

three times for the ﬁrst letter R. Press the 7 key three times for the second letter R. Press the 2 key once for the letter A. Press the 4 key

three times for the I. Press the 6 key two times for the letter N. Press the 3 key twice for the letter E.

7. Press the SELECT/SAVE button to save.

NOTE: The Phone Name and ID shows in the display when the phone is idle.

Programming the Telephone

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

RCA 25415 Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Téléphones RCA 25415