RCA RCR4258 Manuel d'utilisateur télécharger pdf (Page 1)

Four-Component

Universal Remote

Congratulations on your purchase of this four-component

universal remote. This universal remote controls up to four

electronic components and makes juggling remote controls a

thing of the past. Your remote is guaranteed to work with all

brands of components. And, not only is your remote easy to

program, it’s easy to operate, too. We’ve specially designed this

remote with big buttons to give you total control…at the touch

of your ﬁngertips.

SAVE THIS MANUAL AND THE CODE LISTS!

Remote controls can sometimes lose their programming when you

change the batteries. Make sure you keep the manual and code lists in

a safe place so that you can reprogram the remote if you need to.

Tip: The four-component universal remote is already programmed

to operate most RCA, GE and PROSCAN branded TVs, VCRs,

DVD players and satellite receivers. Just press the corresponding

key—DVD•VCR for a DVD player, TV for a television, SAT•CBL

for a satellite receiver, DVR•AUX for a DVR.

Component

keys (TV,

SAT•CBL,

DVD•VCR,

DVR•AUX)

Dedicated

MENU and

GUIDE

keys let

you access

advanced

component

functions

Transport

keys for

DVD/DVR

control

CH and

VOL keys

have dual

functions:

they can

act as

navigation

keys in

systems

as well as

channel

and volume

controllers

outside the

menus

INFO key

displays

information

for the

component

you’re

controlling

Battery Installation and Information

Your universal remote requires two AAA alkaline batteries

(batteries may or may not be included, depending on model).

To install the batteries:

1. Press and push the battery

compartment cover to remove it.

2. Insert the batteries, matching the

batteries to the (+) and (–) marks

inside the battery compartment.

3. Push the battery cover back into place.

Note: If you are replacing batteries, try not to press any buttons after

you’ve taken the old batteries out. Pressing buttons while replacing

batteries causes the remote to lose the devices you’ve programmed. You

will need to program the remote again.

Battery Precautions:

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-

cadmium) batteries.

• Always remove old, weak or worn-out batteries promptly and recycle or

dispose of them in accordance with Local and National Regulations.

Battery Saver

Your universal remote control saves battery power by

automatically turning off if any key is pressed for more than

60 seconds. This saves your battery life should your remote

get stuck in a place where the keys remain depressed, such as

between sofa cushions.

The INPUT and — (dash) key has three functions:

(1) it toggles through all the video sources

connected to your TV; (2) when the remote is in

VCR mode, this button toggles between VCR and

the TV input; (3) when you’re entering digital

channel numbers directly, this button lets you

separate the main channel number from the

subchannel number

RCR4258 / RCR4358

Universal Remote Control

Owner’s Manual

Manual del Propietario (parte posterior)

Programming Your Remote

Your universal remote can operate a variety of brands of

components. In order for your universal remote to control your

components, you need to program the remote with the codes

that match the components (See Code Lists enclosed or go to

rca.com/codeﬁnder). These codes enable the remote to

communicate with your components. Each brand and each

component has its own “language,” and, by programming the

correct codes into your remote, you tell the remote to “speak the

same language” as your components.

Actual

model may

vary from

picture

shown

Care and Maintenance

• Keep the remote dry. If it gets wet, wipe it dry immediately.

• Use and store the remote only in normal temperature

environments.

• Handle the remote gently and carefully. Don’t drop it.

• Keep the remote away from dust and dirt.

• Wipe the remote with a damp cloth occasionally to keep it

looking new.

• Modifying or tampering with the remote’s internal components

can cause malfunction and invalidate its warranty.

1 2 3 4 5 6

Résumé du contenu

Page 1 - RCR4258 / RCR4358

1Four-Component Universal RemoteCongratulations on your purchase of this four-component universal remote. This universal remote controls up to four e

Page 2 - Brand Code Search and Entry

2There are four methods you can use to program your remote control to operate your components: • Brand Code Search and Entry • Direct Code Entry •

Page 3 - Manual Code Search and Entry

3Programming the DVD•VCR Key to Control a VCRThe DVD•VCR key defaults to control a DVD player. If you want the DVD•VCR key to control a VCR, you must

Page 4 - Auto Code Search and Entry

4Testing the Code for Maximum FunctionalityDifferent remote control codes can provide different levels of functionality. To conﬁrm that the component

Page 5 - Accessing Component Menus

5Code RetrievalOnce you’ve programmed the remote to control your components, you may want to record the codes for future reference. If you used the Di

Page 6 - Troubleshooting

6TroubleshootingProblem: The remote does not operate your component.• You must put the remote in the correct mode by pressing the corresponding comp

Commentaires sur ces manuels

Pas de commentaire

RCA RCR4258 Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Télécommandes RCA RCR4258. RCA RCR4258 User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

RCA RCR4258 Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Télécommandes RCA RCR4258. RCA RCR4258 User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Télécommandes RCA RCR4258